The Building Enclosure Core

The Building Enclosure Core reflects a very different perspective in enclosure design.  The ‘Core’ refers to all elements of the enclosure with the exception of its exterior cladding system.  It is both physical construct as well as resilience exercise as it embodies the most critical elements of air, moisture, and thermal management. Traditionally the industry…

The 2012 Energy Code Necessitates Perfection

Adoption of the 2012 International Energy Code will require exterior continuous wall insulation for climate zones 6, 7, and 8.  When used in combination with cavity insulation, the minimum requirements include 20+5 or 13+10.  The first value pertains to cavity insulation whereas the second is continuous exterior insulation (CI).   Although comparable insulation strategies are also…

Exterior Insulation And Drainage Plane Woes

The IECC’s requirement for 1” continuous exterior insulation has prompted wall configurations that integrate various types of outbound insulating materials.    With all of these systems, adequate considerations must be made for the amount of moisture penetration from wind driven rain and the presumed location of this moisture load.   It is generally assumed that exterior surfaces of…

Reach A Higher State Of EIFS Consciousness

Moisture performance of EIFS is misunderstood and it continues to be a subject of consternation.  Much of the confusion stems from the fact that design criteria for EIFS assemblies incorporating cavity insulation plus outbound insulation panels have not been adequately addressed by the EIFS industry.  Manufacturers place the responsibility of assembly design squarely on the…